
•
Energy Efficiency
A heat pump does not stop working when the temperature drops. What it loses is capacity, and at some point every heat pump reaches a temperature where it can no longer keep up entirely on its own. Where that point falls, and what happens once you reach it, is worth understanding before the coldest part of a Denver winter tests it for you.
What Is a Heat Pump's Balance Point?
The balance point is the outdoor temperature at which a heat pump's heating capacity exactly matches your home's heat loss on a typical day. Above that temperature, the heat pump alone comfortably keeps the house warm. Below it, the house is losing heat faster than the heat pump can replace it, and something else has to make up the difference. That something is backup heat.
Why Heat Pump Capacity Drops as It Gets Colder
A heat pump works by pulling heat out of outside air, even cold air, and moving it indoors. As outdoor temperatures fall, there is simply less heat energy available in that air to extract, so the system's output capacity drops along with the temperature. This is normal operation, not a malfunction. It is also the reason sizing and backup heat planning matter more for a heat pump than for a furnace, which generates heat directly regardless of outdoor conditions.
What Backup Heat Actually Is
Most heat pump systems handle the gap below the balance point one of two ways. Electric resistance strips built into the air handler kick in to supplement the heat pump's output directly. Alternatively, in a dual-fuel setup, a gas furnace takes over entirely once temperatures drop past a set point, with the heat pump stepping back. Either way, backup heat is meant to be a supplement for the coldest stretches of the season, not the primary source of heat through an entire winter.
How to Tell If Your Backup Heat Is Kicking In More Than It Should
Backup heat running occasionally during the coldest mornings of the year is expected. Backup heat running constantly, or a noticeably higher electric bill through a stretch of only moderately cold weather, usually means the balance point is being reached earlier than it should be. That can point to a heat pump that is undersized for the home, losing refrigerant charge, or dealing with a mechanical issue that is reducing its effective capacity below what it is rated for.
Balance Point vs. Reversing Valve Problems: Two Different Things That Feel the Same
A heat pump relying more on backup heat as it gets colder is normal behavior at the balance point. A heat pump that will not heat effectively at all, regardless of outdoor temperature, right after the fall switch-over from cooling, points toward a different problem entirely, often the reversing valve, refrigerant charge, or an electrical connection rather than the balance point. That failure mode is covered in more detail here. Telling the two apart matters, since one is expected physics and the other is a repair.
Can a Correctly Sized Heat Pump Handle Denver Winters Without Much Backup Heat?
A heat pump sized and selected correctly for the Front Range climate can carry the large majority of a typical winter on its own, with backup heat filling in only for the coldest handful of days each year. Undersized systems, or systems chosen without accounting for how far temperatures actually drop locally, end up leaning on backup heat far more often than they should, which shows up directly in the electric bill.
What This Means for Your Electric Bill
Electric resistance backup heat is far less efficient than the heat pump itself, so every hour it runs costs meaningfully more than an hour of normal heat pump operation. A system with a balance point set too high for the home, whether from sizing, wear, or a developing mechanical issue, ends up leaning on that expensive backup heat more often than it needs to, and the bill reflects it well before anyone notices a comfort problem.
Serving the Denver Metro
We service and size heat pump systems for homes across the Denver metro, including Denver, Aurora, Lakewood, Westminster, Thornton, Centennial, Broomfield, Parker, Highlands Ranch, Commerce City, Littleton, Wheat Ridge, Brighton, Englewood, Arvada, Golden, Castle Rock, Greenwood Village, and Northglenn.
Frequently Asked Questions
What outdoor temperature is a typical heat pump balance point? It varies by system size and the home's heat loss, but many correctly sized heat pumps in this climate hold a balance point somewhere in the low to mid 20s Fahrenheit, with backup heat filling in below that.
Do all heat pumps need backup heat in Colorado? Most do, since Front Range winters regularly drop below any heat pump's balance point for at least some stretch of the season. The goal is minimizing how often backup heat is needed, not eliminating it entirely.
Will backup heat turning on a lot in winter show up on my electric bill? Yes, noticeably. Electric resistance backup heat costs considerably more to run than the heat pump's normal compressor-driven heating, so frequent backup heat use is one of the more common causes of an unexpectedly high winter electric bill.
How is a balance point problem different from a heat pump that will not heat at all? A balance point issue means the system still heats, just with more backup heat assistance than expected. A heat pump that will not heat at all, especially right after switching over from cooling, usually points to a mechanical issue like the reversing valve rather than the balance point.
Can the balance point be improved without replacing the whole system? Sometimes. Confirming the system has a full refrigerant charge, clean coils, and no mechanical wear dragging down capacity can meaningfully improve real-world performance before assuming replacement is the only option.
Find Out Where Your System's Balance Point Actually Is
If backup heat seems to be running more than it should, it is worth finding out whether that is normal for your climate or a sign something needs attention.
RELATED ARTICLES
Related Articles
Discover related articles covering expert advice, practical tips, and useful information for homeowners.


